Dear Customer,
Congratulations on purchasing this equipment. Please
read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring
the items and cautions mentioned in the instruction
manual is not covered by our warranty and any liability.
Scan the QR code to get access to the latest user mannual
and other information about the product:
PRODUCER
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
HOW TO PUT ON THE BELT CORRECTLY
1. Attach one end of the strap to the elastic strap.
2. Adjust the elastic strap to a length appropriate to you. The belt should be
adjusted so that it remains in place during the workout.
3. Moisten the two electrode areas (see figure 3).
4. Put the strap around the chest. The transmitter should be under the chest.
Make sure that the electrodes are pressed firmly against your skin. Make
sure the CE logo is on the back of the strap, on the left side (see Figure 4).
5. Finally, attach the other end to the elastic strap.
The logo must be readable and not
upside down.
EN
7