Luminance Brands Kathy Ireland Home CF542ORB00 El Manual Del Propietario página 9

3. Ceiling Fan Assembly
3.10
Carefully turn and place the partially assembled Ceiling
Fan right side up, on the styrofoam being careful not to
bend the Ceiling Fan Blades (Figure 10) .
3.11
Remove the Hanger Ball from the 4 .5" Downrod by
loosening the Set Screw in the Hanger Ball until the Ball
falls freely down the Downrod (Figure 11) .
Remove the Pin from the Downrod, then remove the
Hanger Ball .
Retain the Pin and Hanger Ball for reinstallation in
Step 3 .18 .
NOTE: Do not loosen the screw holding the green
ground wire.
3.12
Separate, untwist and unkink the Three 80" Motor
Wires .
Route the 80" Black and White Motor Wires through the
4 .5" Downrod (Figure 12) .
(continued)
Figure 10
PIN
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 11
THREE 80" MOTOR LEADS (UNTWISTED)
THREE 80" MOTOR WIRES (UNTWISTED)
Figure 12
Please contact 1-800-777-4440 for further assistance
9
GREEN GROUND WIRE
4.5" DOWNROD
HANGER BALL
4.5" DOWNROD
luminancebrands.com
U.L. Model No.: CF542 & CF552