Fan Operation - Lifetime Air TF-35A Manual De Instrucciones

(UK) INSTRUCTIONS
Assembling the Fan base
The Oscillation Base of the tower fan is assembled the two part of
base together. First thread plug & wire through the flute of the base,
then put two part of the base together, at last screw oscillation base
to the fan.

Fan Operation

Once the fan has been completely assembled, you can now plug into a
mains socket.
Control Panel Operation Instructions
The half part without
When the arrowhead on the button directs to 1\2\3 that means:
Low speed without oscillation
Normal speed without oscillation
High speed without oscillation
The other part with
When the arrowhead on the button directs to 1\2\3 that means:
Low speed with oscillation
Normal speed with oscillation
High speed with oscillation
0 means turn off the fan.
Warnings:
•
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not
play with the appliance.
Specifications:
220-240V~50Hz
45W