Maintenance And Storage - gopart 60L Manual Del Usuario

MAINTENANCE AND STORAGE

WARNING: Improper maintenance and storage of the push spreader may void your warranty.
MAINTENANCE
• • After each use clean material out of hopper.
UK
• Rinse/dry inside and outside of the spreader after each use.
• Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE
20 PSI.
• Periodically check all fasteners for tightness.
• Annually clean and lightly lubricate parts.
• Never exceed load capacity rating of 125lbs it will damage the spreader.
IMPORTANT: If a part needs replacement, only use parts that meet the manufacturer's specifications. Replacement
parts that do not meet specifications may result in a safety hazard or poor operations.
STORAGE
• Never allow material to remain in the hopper for extended periods of time.
• Before storing make sure the spreader is clean and dry for years of trouble free
service.
• Store indoors or protected area during severe weather and winter months.
SPECIFICATIONS
Load Capacity
Spreader Type
Hopper Material
Hopper Dimensions 29.5" x 16.5" x 13.4"
Overall Dimensions 43.3" x 31.5" x 38"
Wheel size
Tire Pressure (PSI) 20
Unit Weight
12
125lb
Broadcast
Polypropylene
14''
18.5kg