Publicidad
V I D E O P O R T E R O E L E C T R Ó N I C O - V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R É L E C T R O N I Q U E
PASOS DE CONFIGURACIÓN
STEP-BY-STEP CONFIGURATION
ETAPES DE CONFIGURATION
Nota:
Check the requirements of the installation and make sure that the default configuration meets these requirements. For that function,
see the tables concerning the installation menu and the user menu on page 11.
If the preset configuration does not meet your requirements, follow these steps:
Enter in the installation menu
Change the values of the different positions as indicated in the following pages.
Enter in the user menu (page 19).
Change or keying the USER codes you desire (position 1 of the user menu).
Enter in the installation menu
Replace the default MASTER code with another MASTER code (position 6 of the installation menu).
If the predetermined configuration meets your requirements, carry out only steps 3 to 6.
Two tables are provided in the user manual: one showing how the keypad is configured, the other for you to note down the USER codes
you program.
Note: If the USER codes are shared by several users, we recommend that you disable access to the user menu to avoid possible tampering
(position 5 on the installation menu).
Remarque:
Publicidad
