Publicidad
HUTCH ATTACHMENT
10. If you are planning to attach your hutch to the 234W Wide Bookcase Base or 235W Wide
Console Base read the instructions inserted in this packet.
S
x 1
T
x 1
N
x 1
FIG. 11
11. Once you have attached the hutch to the base, position the unit at a desired locations. Locate
a stud in the wall behind the unit. Attach "L" Angle Bracket (S) to the wall stud with Screw (T) so
that the other half of the bracket may be attached to the Top Shelf (B). See FIGURE 11. Attach
"L" Angle Bracket to Top Shelf with Screw (N). If stud in wall cannot be located, purchase proper
wall attachment hardware for your type of wall and secure the unit.
Page 8 — 236W/237W
Top Shelf
Side
Panel
Stud
T
N
S
Publicidad
