Jata electro FR509 Guia De Inicio Rapido página 10

Tabla de contenido

Publicidad

• Clean the basket and the tank with a damp cloth, and dry them
carefully afterwards.
• Place again the tank, the electrical unit and the basket.
• Make sure that the electrical unit (4) is correctly inserted in its
guides as it has a security system to avoid that the appliance can
start working with the electrical unit is incorrectly inserted or out
of its anchorage.
• Pour the oil into the tank (6). Bear in mind that the oil level must
always be between the minimum (MIN) and the maximum (MAX)
level. Both levels are indicated inside the tank.
• While you prepare the food for cooking you may heat up the oil.
To do so, plug the deep fryer into the mains. The on indicator light
(red color) will light on. This indicator will be always on when the
deep fryer is plugged to the mains.
• Turn the temperature selector (8) clockwise to the adequate position
according to the food to be fried. The higher temperatures are
usually the most adequate for frying food.
• Next turn the timer knob (7) clockwise to select the desired working
time (max. 30 minutes), Doing that operation the green indicator
light will light on and the oil starts heating.
• Wait for the ready indicator light (green color) goes off; then the
oil will have reached the selected temperature.
• Place the food to be fried in the basket (11). This must be done
with the basket out of the tank, and the food must not exceed
the three-quarter parts of its volume.
• If the food to be fried is in batter, it is advisable to put them with
the basket in the oil to avoid sticking to the basket.
• Insert the basket with the food into the tank (6). If you wish you
can put the lid (1) and check by the viewer (2).
• Once the food are ready, remove the basket and await till they
wring, leaving the basket hung on its support (14) in the edge of
the tank.
• The deep fryer will switch off automatically once passed the
programmed time. After that you will listen an acoustic signal.
• If you want to stop the functioning of the deep fryer before
finishing the programmed time, unplug from the mains. The timer
is mechanical that's why it will continuous working until the end
of the programmed time.
• If you want to keep working the deep fryer turn the timer knob
clockwise before switching off the deep fryer.
• Once the fried is finish, unplug the deep fryer from the mains and
turn the temperature selector to the position (0).
• Place the lid to protect the oil from environmental particles.
• You can fold the handle by keeping slide the locked knob (13).
• For your comfort, collect the feeding cord in the cord anchorage
(5).
10

Publicidad

Tabla de contenido
loading

Tabla de contenido