Chauvet CORE 3x3 Guía De Referencia Rápida página 4

CORE™ 3x3 QRG
AC Power
Power Linking
Fuse
Replacement
Mounting
Mounting
Diagram
Control Panel
Description
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 3 CORE™ 3x3 products at 120 VAC and 7 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Mounting Clamp
Bracket Adjustment Knobs
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases
<UP>
the numeric value when in a function
Navigates downwards through the menu list and
<DOWN>
decreases the numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
4
EN
Safety Cable
Hanging/Mounting
Bracket