Artículos Necesarios; Cómo Funciona; Instrucciones Importantes De Seguridad - Cooper Lighting MS80 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Desired
Time Adjust
Operation
Knob Setting
Test Setting
Lights should turn ON with
(test)
motion both day and night.
Light should turn off
after 8 seconds.
Reset fixture to
Auto setting
the "Auto"
between
(motion activated)
"+" and "T"
setting.
TROUBLESHOOTING
Problem
Cause / Solution
Light comes on
There is motion in the detection zone.
for no apparent
• Make sure the sensor is not picking up moving objects such as
trees, traffic, etc.
reason at night.
TEST FOR YOURSELF:
• Cover the sensor lens with cardboard to prevent sensor
from detecting motion. If the light stays off, something in the
detection zone is triggering the sensor.
* If the light stays on with the sensor lens covered, contact
customer service.
• Reposition the sensor.
Light stays on at
There is motion in the detection zone.
• Make sure the sensor is not picking up moving objects such as
night and does
trees, traffic, etc.
not turn off.
• Reposition the sensor.
Unit is in override mode (if there is no motion).
• Turn the light switch off for at least 10 seconds and then turn
back on. This will send the unit back into the "Auto" mode.
Light does not
No power to the fixture.
come on with
• Check if circuit breaker tripped.
motion at night.
• Confirm wall switch is ON.
Bulb is faulty.
• Replace bulb.
Surrounding external ambient light is too bright. (If so, the unit may
think it is daytime.)
• Re-aim the head.
• Relocate or reposition the unit away from the light.
TURN OFF POWER BEFORE CONTINUING
Wiring to the unit is loose.
• Check wiring, and reconnect if necessary using wire
connectors (G) provided.
Light continuously
The light given from the unit's own lamp is affecting the
motion sensor.
blinks on and
• Re-aim the lamp.
off at night.
• Reposition the sensor.
Light is on during
The knob on the bottom of the motion sensor is in the test
("T") mode.
the day.
• Refer to "OPERATING YOUR FIXTURE."
Unit is in override mode.
• Turn the light switch off for at least 10 seconds and then turn
back on. This will send the unit back into the "Auto" mode.
The motion detector is shadowed.
• Reposition the sensor.
Cannot activate
No power to the fixture.
standard
• Check if circuit breaker tripped.
floodlight setting
• Confirm wall switch is ON.
(manual override).
Bulb is faulty.
• Replace bulb.
TURN OFF POWER BEFORE CONTINUING
Wiring to the unit is loose.
• Check wiring, and reconnect if necessary using wire
connectors (G) provided.
There is more than one fixture on an indoor wall switch.
• If so, put them on separate switches.
Wall ON/OFF
Switch Setting
"T"
Keep the power to
the fixture ON.
Turn the power OFF
for at least 10 seconds,
then back ON
or turn the power
OFF-ON-OFF-ON.
2-YEAR LIMITED WARRANTY
LUX Control
Knob Setting
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
"T"
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
(test)
Cooper Lighting, LLC ("Cooper Lighting") warrants to customers that, for a period of two years
from the date of purchase, Cooper Lighting's products will be free from defects in materials
and workmanship. The obligation of Cooper Lighting under this warranty is expressly limited
to the provision of replacement products. This warranty is extended only to the original
purchaser of the product. A purchaser's receipt or other proof of date of original purchase
Auto setting
acceptable to Cooper Lighting. This is required before warranty performance shall be rendered.
between
and "T"
This warranty does not apply to Cooper Lighting products that have been altered or repaired
or that have been subjected to neglect, abuse, misuse or accident (including shipping damages).
This warranty does not apply to products not manufactured by Cooper Lighting which have been
supplied, installed, and/or used in conjunction with Cooper Lighting products. Damage to the
product caused by replacement bulbs or corrosion or discoloration of brass components are
not covered by this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT,
STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS; NOR SHALL
THE LIABILITY OF COOPER LIGHTING FOR ANY CLAIMS OR DAMAGE ARISING OUT OF OR
CONNECTED WITH THESE TERMS OR THE MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE,
REPAIR OR MODIFICATION OF COOPER LIGHTING PRODUCTS, OR SUPPLY OF ANY REPLACEMENT
PARTS THEREFORE, EXCEED THE PURCHASE PRICE OF COOPER LIGHTING PRODUCTS GIVING RISE
TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.
To obtain warranty service, please contact Cooper Lighting, LLC, at 1-800-334-6871, press
option 2 for Customer Service, or via e-mail ConsumerProducts@cooperlighting.com and
include the following information:
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem
All returned products must be accompanied by a Return Goods Authorization Number issued
by the Company and must be returned freight prepaid. Any product received without a Return
Goods Authorization Number from the Company will be refused.
Cooper Lighting, LLC is not responsible for merchandise damaged in transit. Repaired or
replaced products shall be subject to the terms of this warranty and are inspected when
packed. Evident or concealed damage that is made in transit should be reported at once to
the carrier making the delivery and a claim filed with them.
Reproductions of this document without prior written approval of Cooper Lighting, LLC are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@cooperlighting.com.
Printed in China
ARTÍCULOS NECESARIOS
(se compran por separado)
• Destornillador en cruz (Phillips)
• Destornillador de cabeza plana
• Taladro
• Calafateo de silicona resistente a la intemperie
CÓMO FUNCIONA
La lámpara de alta intensidad activada por movimiento
detecta imágenes térmicas de objetos tales como
personas, animales grandes y motores de automóviles.
Cuando se detecte movimiento, la luz se encenderá
automáticamente. Una vez que el movimiento haya
cesado, la luz se apagará después de un tiempo de
retardo preseleccionado. Esta lámpara de alta intensidad
activada por movimiento también puede ser utilizada
como una lámpara de alta intensidad estándar.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Al utilizar el producto, siempre se deben seguir las precauciones básicas,
incluído lo siguiente:
• Lea y siga estas instrucciones.
• Tenga en cuenta todas las advertencias, incluyendo las advertencias a continuación
Y aquellas incluidas en el producto.
• Guarde estas instrucciones y advertencias.
• Sólo para uso en exteriores.
• cULus para ubicaciones mojadas.
• Adecuado para instalarse en la pared o en aleros solamente. NO es adecuado para
instalarse montándolo en el suelo.
• Desensamblar la lámpara anulará la garantía.
• La lámpara es percableada y ensamblado para facilitar la instalación.
• No retire el tornillo de ajuste. Apriete la conexión del montaje del cabezal del aplique
y el sensor de movimiento a la base para evitar cualquier rotación.
3
ESPAÑOL
Hasta 70 pies
110 grados

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ms80w

Tabla de contenido