Troubleshooting; List Of Accessories And Components Available; Warranty/Recycling - Kitett MINILIT DUO Modo De Empleo

7

Troubleshooting

EN
PROBLEM
The display screen of the device
does not light up
Low or no suction
The suction is too strong despite
decreasing
suction with the
The breast pump sucks con-
tinuously
Liquid has been spilt on the
breast pump
The equipment stops
suddenly in suction
The equipment is noisy
during use
A part or accessory in the kit
is missing
Contact DTF MEDICAL or your local supplier:
• For assistance, if necessary, with the assembly, use or maintenance of the device
• To report unforeseen functioning or events.
8

List of accessories and components available

PART DESIGNATION
Fisio Bib – Batch of 2 collection containers 100 ml
KOLOR® breast shields
"Clean Valve" transparent valve – Set of 2 valves
+ 2 replacement membranes
Complete tubing (1 long tube + 1 single or double pumping
selector + 2 intermediate-size tubes + 2 complete protective
membranes with their 2 small tubes)
Collection container stand – Batch of 2 ex.
Pouch – Batch of 2 ex.
Protective membrane – 2 ex.
6V power supply type C (Reference: LXCP12-006100BEH,
manufacturer: Shenzhen Longxc Power Supply Co. Ltd)
Type M power adapter
Type G power adapter
KOLOR® MOOV transport bag
9

Warranty/recycling

Warranty
This device is guaranteed for 2 years from the date
of purchase against
This warranty does not cover the consequences of
accidents or any use that does not comply with the
manufacturer's instructions. To be accepted, invoices
must include the vendor's stamp and be dated on the
day of purchase. To make a claim under the guarantee,
the device must be returned complete, with the
invoice, carriage paid.
22
• Make sure that the power cord is connected to the mains and to the unit.
• Press the "ON/STANDBY" button again.
• Check that the current delivered by the mains corresponds to that of the device (Volt (V) Hertz (Hz)).
• Check with another device if a power supply is available in the wall outlet.
• If the device still does not light up, contact DTF MEDICAL or your local supplier.
• Check that the breast shield is fully screwed onto the collection container (screw tightly).
• Check that the "Clean Valve" transparent valve specifi c to the MINIKIT DUO breast pump is present.
• Check that the membrane is correctly positioned on the intermediate ring of the valve.
• Check that the protective membrane is correctly positioned in its housing.
• Check that the tubing is properly connected and not bent.
• Check the condition of the O-ring between the breast shield and the collection container.
• Check there is no residue in the tubing.
• When using double pumping mode, check that the selector is correctly positioned.
• If the problem persists, contact DTF MEDICAL or your local supplier.
• Deactivate the breast pump then turn it on.
• If the problem persists, contact DTF MEDICAL or your local supplier.
button
• Do not pull the breast shield o your breast (risk of pain and injury).
• Insert your fi nger between your breast and the breast shield to allow air to enter permitting the breast shield to
be removed more easily or disconnect the tubing from the breast shield.
• Turn o the breast pump.
• Unplug the AC adapter from the wall outlet.
• Do not place the breast pump upside down. The control panel must face upwards.
• Leave the breast pump in a dry warm place for 24 hours.
Comment:
• Do not expose the breast pump to direct sunlight to dry more quickly.
• Keep dry and protect from moisture.
• Do not speed up the drying process by using a heat source.
• Disconnect the tubing from the device to vent it.
• If it stopped switching from one mode to another, contact DTF MEDICAL or your local supplier.
• Check that the tubing of the device is properly connected to the appliance.
• If the problem persists, contact DTF MEDICAL or your local supplier.
• Contact DTF MEDICAL or your local supplier.
all manufacturing defects.
SOLUTION
REF.
KOLOR® breast shield sold separately:
FIBIBN-E
See opposite
BREAST
REF. SHIELD
Y20367
KIT SIZE
Y23310
WB21ES 21mm
YSUPBIB
WB21EL 21mm
Y1423
Y23262
WB26ES 26mm
Y23317
WB26EL 26mm
Y22266
Y22267
M1540
Recycling
KITETT® breast pumps must be disposed of in
accordance with local disposal guidelines for electrical
appliances. Use your local waste disposal system
for electrical and electronic equipment (including
batteries). You thus contribute to the preservation of
the environment and the protection of human health.
Device placed on the market after 13 August 2005.
BREAST
COMFORT
REF. SHIELD
SIZE
KIT SIZE
Small WB24ES 24mm
Large WB24EL 24mm
Small WB30ES 30mm
Large WB30EL 30mm
COMFORT
SIZE
Small
Large
Small
Large