KitchenAid KSB6060 Manual Del Usuario página 7

USING THE BLENDER
5
Using the Tamper: Remove the ingredient-
measuring cap only. Stir or press contents
down towards the blade. When finished,
replace the ingredient-measuring cap
before resuming blending.
7
After blending, flip the START/STOP
toggle switch up or down to stop. Unplug
the Blender before removing blender jar.
CARE AND CLEANING
NOTE: To avoid damaging the Blender, do not immerse the blender base or cord in
water. To avoid scratching, do not use abrasive cleansers or scouring pads.
1
Empty the blender jar. Fill jar with 24 oz.
of hot water and add 3-4 drops of liquid
dishwashing detergent. Place the lid on the
blender jar, and make sure the blender jar
is fully in place on the blender base.
6
The Pulse function may also be used on its
own as a separate blending function while
the Blender is in Standby mode.
NOTE: Allow the Blender to come to a
complete stop before removing the lid and
pouring your blended ingredients.
3
Rotate the control dial to Max. Flip the
START/STOP toggle switch up or down to
start. Run the Blender for 35 seconds. Flip
the START/STOP toggle switch up or down
to stop. When the blade stops spinning,
pour out the soapy water, and rinse the
blender jar with warm water.
7