AIR8 280 NANO Manual Del Usuario página 8

Air quality
Moderate
Very Poor
Timer
With the Timer button you can set the running time of the device. Times between 1 and
10 hours can be selected.
ION
Press the button to turn on/off the ioniser function when the device is operating in
Normal or Auto mode.
Sterilize
Press the button to turn on/off the UVGI sterilization function when the device is
operating in Normal or Auto mode.
Sleep mode
In the Sleep mode, the device operates at the lowest fan speed for minimal noise
disturbance. Apart from the Sleep display, all other displays turn off.
To exit the Sleep mode, press either Sleep or Speed button.
Speed
Press the Speed button to control the fan speed from 1 to 4 when it is under Normal or
Auto mode. The current fan level is visible on the display.
Filter reset
When the light is displayed in a red colour, it means you have to replace your filters. After
changing them you should reset the filter life indicator by pressing the Timer button for 5
seconds.
Lock
If you press the Lock button, the other buttons cannot be used. To unlock the device,
press the Lock button for 5 seconds.
Remote control
Press the buttons for the respective function.
When you use the remote control, point it towards the air purifier.
Display
Good
Orange
Poor
Blinking red
Fan stage
Green
Medium
Red
Very high
Low
High
8