Publicidad
Idiomas disponibles
Idiomas disponibles
Step 4
Tighten both of the bottom tension knobs (4A) by turning them clockwise at the same time (4B).
Tighten both of the upper tension knobs (4C) by turning them clockwise at the same time until the gap
between the gate and upper right corner come together, leaving a 1.5-2mm gap (4D).
4A
4C
· Use the wrench provided to ease turning the tension knobs ( gures 4E, 4F).
4E
Note:
When tightening, the distance between the 4 tension bolts shoul
Operation
Opening the Gate Locking System ( gure 5A):
1. Rotate the locking handle to the vertical position.
2. Depress the release button as shown.
3. Lift the door up until it swings freely.
4. Swing the door open in desired direction.
Closing and Latching the Gate ( gure 5B):
1. Simply release the gate and allow it to swing closed (unless the Stay-Open feature is used).
2. To activate the triple latch, rotate the locking handle to the horizontal position, as shown in gure 5B.
5A
4
Note: Verify proper gate installation by partially opening and releasing it several times.
The door will swing closed and double-latch automatically. Regularly check tension knobs
and rubber pads to make sure the gate is securely in place.
4F
3
4
2
1
4B
4D
4G
5B
1
2
,
Page 4
Publicidad
