Maxon GPT Serie Instrucciones Instalación página 5

LIFT CORPORATION Sht. 5 of 10 DSG#
NOTE: Correct any fi t and interference problems before continuing with installation.
5. With vehicle parked on level ground,
raise the platform to vehicle fl oor level
(FIG. 5-1). Refer to operating instruc-
tions in Operation Manual. Check for
5/8" +/- 1/8" gap between platform and
edge of extension plate (FIG. 5-1A).
6. The outboard edge of platform should
be level or up to 1" maximum above bed
level (FIG. 5-1).
7. If platform requires adjustment, refer to
platform adjustment procedure in GPT
Installation Manual.
© MAXON Lift Corp. 2021
PLATFORM
LEVEL LINE
0"- 1" MAX
OUTBOARD
EDGE
M-20-07
5/8" +/- 1/8"
EXTENSION
FIG. 5-1A
CHECKING PLATFORM
FIG. 5-1
Rev. A - Date: 01/16/21
PLATE
VEHICLE
FLOOR
(REF)