Style selections BV-8636LT Manual Del Usuario página 7

INSTALLATION INSTRUCTIONS
Step 4: Installing the Strainer
4a. Apply a ring of sealant (not included) to the underside
of the strainer flange.
4b. Insert the strainer body (2) into the sink.
4c. Assemble the rubber washer (3), the paper washer
(4) and locknut (5) onto the strainer body (2) from
underneath the sink.
4d. Hand tighten the locknut (5). Do not over tighten
the locknut as it may split or deform the strainer
body.
4e. Assemble the plastic joint (6) and connecting nut (7)
onto the strainer body (2) from underneath the sink.
4f. Insert the screener (1) into the strainer.
Step 5: Mounting the Sink
5a. Carefully place a bead of adhesive all around the
top of the cabinet.
5b. Ease the sink into the cabinet , ensuring that it is
placed evenly and is centered on the cabinet. Wipe
off any excess adhesive. Use masking tape to hold
the sink in place until the adhesive dries.
4
4
5
7