Safety Instructions - AIKUN AP100W Instrucción De Funcionamiento

Safety Instructions

※ Before using the product, please read the following carefully and use the product correctly.
- Do not dismantle, repair, rebuild, if you need to repair please be sure to contact the service center.
(Quality assurance is not applicable to arbitrarily decomposed products)
-No foreign matters such as drinks or water are allowed to enter the product. Failure, risk of electric shock.
- Please do not bend or be pressed by heavy objects when connecting wires. Danger of fire or electric shock.
- Please use dry towel and soft wet towel to wipe the appearance of the product. Using towels or detergents with more moisture will
cause damage to appearance, breakdown, electric shock, etc..
- Please do not put this product near direct light, candle light, hot air balloon (stove, microwave oven, etc.). It will lead to product
deformation, explosion and fire.
- Please do not impact the product. Stay away from places where there are vibrations or types of magnets. It is the cause of product
failure.-
Please do not install the product in wet places, places with too high temperature (above 30 ˚ C) or places with too low temperature
(below 5 ˚ C). Danger of fire or false start..
- When not in use, please separate the micro USB cable from the product and keep it in a dry place without water and humidity..
2