Symbols On Unit; Environmental Conditions - Phcbi MDF-DU300H Manual De Instrucciones

SYMBOLS ON UNIT

The following symbols are attached to the unit. The table describes the meaning of the symbols.

ENVIRONMENTAL CONDITIONS

This equipment is designed to be safe at least under the following conditions (based on the IEC 61010-1):
■ Indoor use;
■ Altitude up to 2000 m;
■ Ambient temperature 5
■ Maximum relative humidity 80 % for temperature up to 31
humidity at 40 o C;
■ Mains supply voltage fluctuations up to ±10 % of the nominal voltage;
■ Transient overvoltages up to the levels of OVERVOLTAGE CATEGORY II;
■ Temporary OVERVOLTAGES occurring on the mains supply;
■ Applicable pollution degree of the intended environment (POLUTION DEGREE 2 in most cases);
10
This symbol is attached to covers that access high-voltage electrical components to
prevent electric shock. Only a qualified engineer or service personnel should be
allowed to open these covers.
This symbol indicates that caution is required. Refer to product documentation for
details.
This symbol indicates Incorrect usage could lead to a fire hazard.
This symbol indicates an earth.
This symbol means "ON" for a power switch.
This symbol means "OFF" for a power switch.
o C to 40 o C;
o C decreasing linearly to 50 % relative