Publicidad
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
WE RECOMMEND FINISHING THE UNIT BEFORE STARTING YOUR ASSEMBLY.
Fig. 1
1. Insert four Slats (J) into the Back Apron (Kb) and Back Support (Ub). Gently tap with a
padded hammer. See Figure 1.
Qb
2. Place a thin layer of glue into the dowel holes in the Right Back Leg (Qb) and Left Back Leg
(Nb) and insert the dowels in the Back Apron/Support Assembly. Gently tap with a padded
hammer and quickly wipe up any excess glue with a damp rag. Using the pocket drilled holes
as guides, securely affix the back assembly to the back legs with four #8 x 1¼" Pan
Head Screws (Zk). See Figure 2. Place assembly off to the side.
Page 4 – 636Wb – Rev. 10/08
636Wb Mission Desk
Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue.
IMPORTANT:
Read the enclosed finishing hints FIRST.
Ub
Kb
ZK
ZK
J
DO NOT GLUE
Nb
Fig. 2
Publicidad
