Publicidad
Fig. 5
5. Place a thin layer of glue in the five dowel holes on the back assembly. Insert the dowels and
gently tap with a rubber hammer. Quickly wipe up any excess glue with a damp rag. Using the
pocket drilled holes as guides, securely affix the top/side assembly to the back assembly with
six #8 x 1¼" Pan Head Screws (ZK). See Figure 5.
Fig. 6
6. Using the pocket drilled holes as guides, securely affix the back assembly to the top assembly
with four #8 x 1¼" Pan Head Screws (ZK) as shown in Figure 6.
Page 6 – 636Wb – Rev. 10/08
ZK
ZK
ZK
ZK
ZK
ZK
ZK
ZK
ZK
Publicidad
