Member's Mark MG3208SLP Manual De Instrucciones página 18

NOTE about LP Gas Tank Exchange Programs
Ÿ
Many retailers that sell grills offer you the option of
replacing your empty LP Gas tank through an ex-
change service. Use only those reputable exchange
companies that inspect, precision fill, test and certify
their tanks. Exchange your tank only for an OPD safety
feature-equipped tank as described in the LP Gas tank
section of this manual.
Ÿ
Always keep new and exchanged LP Gas tanks in an
upright position during use, transit or storage.
Ÿ
Leak test new and exchanged LP Gas tanks BEFORE
connecting one to your grill.
How to Leak Test your LP Gas Tank
For your safety:
Ÿ
All leak tests must be repeated each time your LP
Gas tank is exchanged or refilled.
Ÿ
When checking for gas leaks do not smoke.
Ÿ
Do not use an open flame to check for gas leaks.
Ÿ
Your grill must be leak tested outdoors in a well-
ventilated area, away from ignition sources such as
gas fired or electrical appliances. During the leak test,
keep your grill away from open flames or sparks.
Ÿ
Do not use household cleaning agents. Damage to
gas assembly components can result.
Use a clean paintbrush and a 50/50 mild soap and
water solution.
Brush soapy solution onto LP Gas tank in the
areas indicated by the arrows. See diagram.
If growing bubbles appear do not use or move the
LP Gas tank. Call an LP Gas Supplier or your Fire
Department.
WARNING
!
If growing bubbles appear do not use or move
the LP Gas tank. Contact an LP Gas Supplier
or your fire department!
USE AND CARE INSTRUCTIONS
!
LP Gas Model only:
Secure a 20lb LP Gas Tank to Gas Grill or
Range
Turn your LP Gas Tank Valve clockwise to the
closed or OFF positon.
Unscrew the Wing Bolt from right bracket of tank
holder.
Place LP Gas tank into tank holder on the Tank
Tray.
Install the tank so the Tank Valve faces the rear
right corner of cabinet.
Align an additional nut and screw the Wing Bolt
into right bracket of tank holder to secure the
gas tank.
Wing Bolt 1/4"x1/2"
Qty. 1
S233G0408B
Part #
One Nut is fixed to
Tank Holder. An
additional Nut and
Wing Bolt is secured
AFTER inserting tank
into tank hole.
18
Additional Nut