Member's Mark MG3208SLP Manual De Instrucciones página 24

Install the AC (alternating current) Rotisserie Motor onto the Motor Bracket as shown below. Be sure
4.
the Motor attaches to the Bracket with the electrical cord down. This installation insures that once
the Spit is inserted into the Motor it will also rest securely into the slot of your grill bowl.
Rotisserie M otor
Motor Bracket
5. Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the left side
of your grill and the Handle on the right side. Place the Bushing into the slot opening on the right
side of your grill bowl, then tighten the Collar Thumbscrew to the left of the Bushing. The Collar will
stabilize the Rotisserie during the cooking process and the Bushing allows the Rotisserie Spit to turn
smoothly. Plug the Rotisserie into an outlet and turn on to test.
M otor
The Bushing and Collar must always be used with this Rotisserie.
BEFORE rotisserie cooking you will need to remove the Cooking Grid(s) and possibly the Savor Plates®
from your grill. When rotisserie cooking place a Cooking Pan under the food to be cooked. This will
capture the drippings and keep your grill clean of excess grease which could cause a fire. Use caution
when moving a Cooking Pan containing hot oils.
Rotisserie Spit must rest securely
into the slot of your grill bowl.
T hu mbsc rew Holding Forks T hu mbsc rew
Collar
Spit
24
Bushing
Handle