WEG WECC300 V1.2X Referencia Rápida De Los Parámetros, Alarmas Y Fallas página 10

QUICK REFERENCE OF PARAMETERS, ALARMS AND FAULTS
Param. Description
P311 Serial Bytes Config.
P312 Serial Protocol
P313 Action for Communic. Error
P314 Serial Watchdog
P316 Serial Interf. Status
P320 Flying Start / Ride-Through
P331 Voltage Ramp for FS and RT
P332 Dead Time
P340 Auto-Reset Time
P375 External Temperature Sensor
P395 External Rel. Humidity Sensor
P397 Control Config
P399 Motor Rated Efficiency
P400 Motor Rated Voltage
P401 Motor Rated Current
P402 Motor Rated Speed
P403 Motor Rated Frequency
P404 Motor Rated Power
P407 Motor Rated Power Factor
P408 Run Self-Tuning
P409 Stator Resistance
P510 SoftPLC Eng. Unit
P511 SoftPLC Indication Form
P580 Fire Mode Configuration
P582 Fire Mode Auto-reset Adjustable
P588 EOC Maximum Torque
P589 EOC Minimum Voltage
P590 EOC Minimum Frequency
10 | WECC300
Adjustable Range
0 = 8 bits, no, 1
1 = 8 bits, even,1
2 = 8 bits, odd, 1
3 = 8 bits, no, 2
4 = 8 bits, even,2
5 = 8 bits, odd, 2
0 to 1 = Reserved
2 = Modbus RTU Slave
3 to 4 = Reserved
5 = Modbus RTU Master
0 = Inactive
1 = Ramp Stop
2 = General Disable
3 = Go to LOC
4 = LOC Keep Enab.
5 = Cause Fault
0.0 to 999.0 s
0 = Inactive
1 = Active
2 = Watchdog Error
0 = Inactive
1 = Flying Start
2 = FS / RT
3 = Ride-Through
0.2 to 60.0 s
0.1 to 10.0 s
0 to 255 s
0.0 to 200.0 ºC
0.0 to 100.0 %
0 to 3F (hexa)
Bit 0 = Slip Compens. Regen.
Bit 1 = Reserved
Bit 2 = Is Stabilization
Bit 3 = P297 reduction in A050
Bit 4 = P297 reduction in A152
Bit 5 = P297 reduction in A050 or A152
50.0 to 99.9 %
0 to 240 V
0.0 to 40.0 A
0 to 24000 rpm
0 to 400 Hz
0 = 0,16 HP (0,12 kW)
1 = 0,25 HP (0,18 kW)
2 = 0,33 HP (0,25 kW)
3 = 0,50 HP (0,37 kW)
4 = 0,75 HP (0,55 kW)
5 = 1,00 HP (0,75 kW)
6 = 1,50 HP (1,10 kW)
7 = 2,00 HP (1,50 kW)
8 = 3,00 HP (2,20 kW)
0.50 to 0.99
0 = No
1 = Yes
0.01 to 99.99
See options in P209
See options in P210
0 = Inactive
1 = Active
2 = Active / P134
3 = Reserved
4 = Active / General Disable
0 = Limited
1 = Unlimited
0 to 85 %
40 to 80 %
12.0 to 400.0 Hz
Factory Setting Prop.
1 cfg
2 cfg
1
0.0 s cfg
ro
0 cfg
2.0 s
1.0 s
0 s
ro
ro
21 (hexa) cfg
According to the cfg, VVW
Inverter Model
220 V cfg, VVW
1.0 x I cfg, VVW
nom
1720 rpm cfg, VVW
60 Hz cfg, VVW
According to the cfg, VVW
Inverter Model
According to the cfg, VVW
Inverter Model
0 cfg, VVW
According to the cfg, VVW
Inverter Model
0
According to the
Inverter Model
0 cfg
0 cfg
0 % cfg
40 % cfg
20.0 Hz cfg