4-1/2"
(11.4 cm)
72" (182.9 cm)
Product Information
Applicable product:
Drop-in rim style, right-hand pump
Tile flange, right-hand pump
Fixture*:
Bathing well:
Basin area, bottom
53" (134.6 cm) x 26" (66 cm)
Basin area, top
65" (165.1 cm) x 34" (86.4 cm)
Weight
70 lbs (31.8 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
78 gal (295.3 L)
* Approximate measurements for comparison only.
Drop-in cutout
70-1/2" (179.1 cm) x 40-1/2" (102.9 cm)
V
Pump: 1-speed
120
Minimum access panel
pump/control (required):
1013043-1-B
14"
(35.6 cm)
36" (91.4 cm)
20-1/8"
(51.1 cm)
2-7/8" (7.3 cm)
1-1/2" OD
K-1131P
K-1131P-F
Hz
A
60
7.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
Pump/Control Access Front or
End (If Apron is not Used) 20"
(50.8 cm) W x 15" (38.1 cm) H
42" (106.7 cm)
2-1/2"
(6.4 cm)
3" (7.6 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (173 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
This fixture conforms to CSA B45 and ANSI Standard Z124.1.2. All
dimensions are nominal.
2
1-1/4"
(3.2 cm)
Tile Flange
Detail
1-1/2"
(3.8 cm)
Drop-in Rim
1/4"
Detail
(6 mm)
120 V, 15 A, 60 Hz
Kohler Co.