Home Decorators Collection Silverthorne MTVSC2513SE-2 Guía De Uso Y Cuidado página 11

Assembly (continued)
13
securing the firebox
□ locate the firebox brace (M) and place it snuggly behind the
firebox insert (P) to hold it in position . do not cover any air
venting .
□ insert two large flat head screws (PP) through the holes in the
firebox brace (M) and into the base (C) . tighten until secure .
14
attaching the anti-tip device to the mantel
□ Push one medium screw (KK) through one washer (ll) and fasten the
nylon strap (nn) to the back of the top (a) .
15
attaching the anti-tip device to a wall
□ determine the location of the fireplace and mark the location on the
wall for the nylon strap (nn) screw holes . Using a drill or screwdriver,
make the holes in the wall where marked .
□ if you are attaching to drywall or plaster, insert a wall anchor (oo) into
the hole in the wall .
□ Push one large screw (ee) through one washer (ll) and fasten the
nylon strap (nn) to the wall .
WarninG: this product is only a deterrent . it is not a substitute for
proper adult supervision .
11
Please contact 1-800-986-3460 for further assistance
PP
M
NN
OO
LL
NN
EE
HOMEDEPOT.COM/HOMEDECORATORS
LL
KK