Optional (Opt); Decals Applied Onto The Machine - breviglieri MekFarmer 170 Manual De Empleo Y Mantenimiento

MekFarmer 170
• Stone collar protection on each rotor
• Adjustable floating side shield.
• Adjustable front floating hitches.
2.4.2

OPTIONAL (OPT)

• Spiked or maxi spiked roller
It can be used on damp, clay soils and in difficult working
situations. It does not compact the soil but levels it at the
rear of the machine.
• Cage roller
This is used for soil of medium consistency and when the
degree of humidity is low. It prepares the soil for seeding
but does not compact the surface.
• Packer roller
This is used to crumble the soil worked by the tines to a
further degree and to guarantee a compact surface, opti-
mum for seeding. It has a bearing effect if the seed drill is
mounted in a combined configuration. It is excellent for dry
and hard soil.
• Crumbling roller
Like the packer roller, it it used for further crumbling of the
surface clods. It does not compact the soil excessively and
leave it levelled. It can also be used as load-bearing roller
with a combine seeder.
• Coil roller
This type of roller consists of a bar wound as a coil around
a central axis. It is particularly recommended for light and
sandy soils.
• Gearbox gears
A B 540
rpm
21 40 -
23 38 -
38 23 430
24 37 -
37 24 402
25 36 -
36 25 375
27 34 207
34 27 328
28 33 221
33 28 288
29 32 236
32 29 288
1000 Cod.
rpm
253 8066232
292 8066233
- 8066233
313 8066234
- 8066234
335 8066235
- 8066235
383 8066236
- 8066236
410 8066237
- 8066237
438 8066238
8066238
• Roller adjustment system
Mechanical rams
Hydraulic rams
• PTO shaft
With cam clutch
• Hydraulic seeder linkage(MAX LOAD= 2000 Kg)
• Seeder linkage lifting clamp
• Track eradicator
• Side shields with connecting rods
• SUPERFAST blade replacement system
• Back reflex panels
• Hitching kit for frontal use of the machine
2.5 DECALS APPLIED ONTO THE
MACHINE
The machine has been designed and built in compliance
with all possible safety standards able to safeguard those
who work with it. Despite this, there may still be residue
hazards which are signalled on the machine by decals.
These decals (pictograms) are affixed to the machine and
indicate the various situations of insecurity and danger in
a brief form.
DANGER
Keep the decals clean. Replace the decals if there are
damaged or detached.
Pos Decal Meaning of decal
1 Carefully read the instruction ma-
nual before beginning work.
cod. 9364670
2 Before proceeding with maintenan-
ce operations, stop the machine,
lower it to the ground and consult
the instruction manual.
cod. 9364671
3 Danger of upper limbs being cut off.
Do not remove the guards and keep
well away from moving parts.
cod. 9364662
37