Motorola RLN6257 Manual De Instrucciones página 8

Connector Pinout Mapping Viewed from Rear of Connector
Locking lance down
for bottom row
3. Adjustment
General Procedure
See the Vehicle Adapter, or mobile radio installation manual for product-
specific procedure.
Step 1. Adjust the radio as described in the radio instruction manual.
Step 2. Setup the conditions required to provide a signal to the speaker,
such as an incoming received message and set the vehicular
adapter volume level to maximum.
6
pin #13
pin #15
pin #16
Locking lance up on top row
Figure 4. Terminal Orientation
pin #7
pin #12