Sharpening Metal Cutting Tools; Scratcher Tooth Circular Saw Blades - Stihl FS 300 Manual De Instrucciones

Sharpening
Metal Cutting Tools
1
2
1
2
Never attempt to straighten or weld
a bent or cracked cutting tool – it
might shatter and cause serious or
fatal injury.
: Resharpen frequently, take away as
little material as possible – two or
three strokes of the file are usually
enough.
To avoid out-of-balance:
: Resharpen the cutters (1) uniformly
– do not alter the contour of the
parent blade (2) in any way.
: After resharpening about 5 times,
have blade checked on STIHL
balancer*.
FS 300, FS 350, FS 400, FS 450, FS 480
Grass Cutting Blades,
Brush Knife
Use a flat file* to sharpen dull cutting
grass cutting blades.
In case of more serious wear or nicks:
Resharpen with a grinder or have work
done by STIHL dealer.
Chisel Tooth
1
Circular Saw Blades
Sharpen as described in the instructions
supplied or printed on the inside of the
blade's packaging.
2
Scratcher Tooth
Circular Saw Blades
Use a flat file to file the backs of the teeth
until the tips of the teeth are restored to
full sharpness.
* see "Guide to Using this Manual"
English / USA
39