Safety Regulations - ST CP1 430 Li 48 Serie Manual De Instrucciones

WARNING!: READ THIS MANUAL CAREFULLY BEFORE USING THE
EN
MACHINE. Keep safe for future use.
INDEX
1. GENERAL INFORMATION .......................................... 1
1.1 How to read the manual ...................................... 1
1.2 References .......................................................... 1

2. SAFETY REGULATIONS ............................................. 1

2.1 Training ................................................................ 1
2.2 Preliminary procedures ....................................... 2
2.3 During operation ................................................. 2
2.4 Maintenance, storage ......................................... 2
2.5 Battery / battery charger ..................................... 2
2.6 Environmental protection .................................... 3
3. GETTING TO KNOW THE MACHINE .......................... 3
3.1 Description of the machine and planned use ..... 3
3.2 Safety signs ......................................................... 3
3.3 Identification label ............................................... 4
3.4 Main components ................................................ 4
4. ASSEMBLY ................................................................... 4
4.1 Unpacking (Fig.3) ................................................ 4
4.2 Handle assembly ................................................ 5
4.3 GRASS CATCHER assembly ............................. 5
5. CONTROLS .................................................................. 5
5.1 Safety key (Deactivation device) ........................ 5
5.2 Handle ................................................................. 5
5.3 Cutting height adjustment ................................... 5
6. USING THE MACHINE ................................................. 5
6.1 Preliminary procedures ....................................... 5
6.2 Safety checks ...................................................... 6
6.3 Start-up ............................................................... 6
6.4 Operation ............................................................ 7
6.5 Stopping the machine ......................................... 7
6.6 After operation..................................................... 7
7. MAINTENANCE............................................................ 7
7.1 General information ............................................ 7
7.2 BATTERY ............................................................ 7
7.3 CLEANING .......................................................... 8
7.4 Nuts and bolts ..................................................... 8
7.5 Cleaning the air filter ........................................... 8
8. OCCASIONAL MAINTENANCE ................................... 8
8.1 Cutting means ..................................................... 8
9. STORAGE..................................................................... 9
9.1 Storing the machine ............................................ 9
9.2 Storing the battery ............................................... 9
10. HANDLING AND TRANSPORTATION ........................ 9
11. MAINTENANCE TABLE ...................................... 9
12. Problem identification ....................................... 10
12.1 For machines with electronic control ................ 10
12.2 For machines WITHOUT electronic control ......11
13. ATTACHMENTS ON REQUEST ................................ 12
13.1 "Mulching" kit..................................................... 12
13.2 Batteries ............................................................ 12
13.3 Battery charger ................................................. 12
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain important informa-
tion regarding safety and operation and are emphasised in
this manner:
NOTE OR IMPORTANT
information on what has already been indicated, and aim to
prevent damage to the machine.
This symbol indicates danger. Failure to observe the
warning can lead to possible personal and/or third party injury
and/or damage.
The paragraphs highlighted with a grey dotted square in-
dicate the optional characteristics that are not available
on all models documented in this manual. Check if the
characteristics are available on this model.
Whenever reference is made to a position on the machine
"front", "back", "left" or "right" hand side, this refers to the oper-
ator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for use are numbered 1,
2, 3, etc.
The components indicated in the figures are identified with
letters A, B, C, and so on.
Reference to component C in figure 2 is indicated with the
wording: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The actual pieces can
differ from those illustrated in this document.
1.2.2 Titles
The manual is divided into chapters and paragraphs. The
title of paragraph '2.1 Training" is a sub-title of "2. Safety
regulations".
References to titles or paragraphs are marked with the abbre-
viation chap. or par. and the relevant number. Example: "chap.
2" or "par. 2.1"
2. SAFETY REGULATIONS
2.1 TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop the motor
quickly. Failure to follow the warnings and instructions
may result in fire and/or serious injury.
• Never allow children or persons unfamiliar with these
instructions to use the machine. Local laws may establish
a minimum age for users.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowl-
edge if they have been given supervision or instructions
concerning use of the appliance in a safe way and under-
stand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
EN - 1
these give details or further