Ranpak FillPak TTC Manual Del Operador página 18

FillPak TT with Cut Mechanism
®
Do
When paper feeds out of the converter, place hands away
EN
from the opening of paper chute.
5.4.2 Paper Loading Tips
Do
Create a tight "rope" with the paper when loading the
new pack by twisting the first 20-25 cm (7"-10") of paper
tightly before loading it into the converter. This will move
the remaining paper through the chute without jamming.
Do
At the end of a paper pack, check the converter for any
remaining pieces of paper that may be lodged between
the paddle wheels and the cutting blade. This can cause
a feed jam while trying to load in a new pack of paper.
Remove the top cover and remove any remaining paper
before loading a new paper bundle.
11
Don't
Do not place your hands close to the opening of paper
chute as paper is coming out.
Do
On a regular basis, clean the converter and remove small
paper particles.
FillPak TT with Cut Mechanism Operator Manual - EN
®