System Setup - Gima 35132 Manual De Uso

4.9.8 System Setup

Screen Description:
² "Alarm Vol.": set alarm volume, "1~10" level adjustable, the factory default is 05. It is recommended
that the alarm volume shouldn't be adjusted lower than the factory default value unless the nursing
personnel keeps close attention and surveillance on the patients and the device at all times.
² "Language": language selection. "English", "Simplified Chinese", "Traditional Chinese", "German",
"Spanish", "French", "Italian", "Portuguese", "Polish" and "Turkey" for optional, the factory default is
"English".
² "Demo Mode": to enter into the demonstration mode. This item needs entering password, the default
password is "1234".
"Demo" shows the demonstration waveform and data, which are generated by the monitor.
² "Key tone": to turn on/off key tone, the default is "ON".
² "Beat beep": adjust the volume of pulse beeping sound. "0~7" level adjustable. "0" means switching off
the pulse beep sound, the factory default is "2". The tone of pulse beat beep changes when the
measured SpO
2
User Manual for Vital Signs Monitor
Figure 4.20 System Setup Screen
changes, that is so called pitch-tone function. The higher the SpO
44
value is, the higher
2