Installation (continued)
7
Installation using the AC
adapter (not included)
NOTE: This step is for installation without batteries using
an AC adapter (not included). If using the batteries, install
as instructed in step 5 and skip to step 8. The AC adapter
is not included with the product, but can be purchased from
Homedepot.com.
□
Insert the AC adapter cable (1) into the control box port (2).
□
Install the AC adapter (3) into the power outlet.
NOTE: After installing the AC adapter, the light on the
sensor will ash and the faucet control box will make a
"click" sound when you move your hand in the sensor area.
If not, check if the connections are made properly.
NOTE: If the electricity in the house should suddenly go off
when the faucet is on and the water fails to stop running,
you may turn off the supply valves or replace the AC adaptor
with the battery pack (I) provided.
3
9
Please contact 1-855-HD-GLACIER for further assistance.
2
1
HOMEDEPOT.COM/GLACIERBAY