Tabla de contenido
Publicidad
Installation
All installation must be carried out by a competent person or quali ed electrician. Before connecting
the mains supply ensure that the mains oltage corresponds to the oltage on the rating plate.
irect Connection
he appliance must be connected directly to the mains using an omnipolar circuit brea er with a
minimum opening of 3mm between the contacts.
The installer must ensure that the correct electrical connection has been made and that it complies
with the wiring diagram.
The cable must not be bent or compressed.
egularly chec the power plug and power cord for damage. If the supply cord is damaged it must
be replaced by a special cord or assembly a ailable from the manufacturer or its ser ice agent.
WARNING: This is a Class II appliance and MUST NOT be earthed
This appliance is supplied with a 2 core mains cable coloured as follows:
Brown
L or Li e
Blue
N or Neutral
EUR
N
L
N
(Blue)
L
(Brown)
To a oid the ris s that are always present when you use an electrical appliance it is important that
this appliance is installed correctly and that you read the safety instructions carefully to a oid misuse
and hazards. Please eep this instruction boo let for future reference and pass it on to any future
owners. After unpac ing the appliance please chec that it is not damaged. If in doubt do not use the
appliance but contact Customer Ser ices - see end of Care
UK
N
L
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
FUSE ON
USE A 3AMP FUSE
maintenance section for details.
21
Publicidad
Tabla de contenido
