Blumfeldt Arizona Rust 10035992 Manual Del Usuario página 22

EN
22
INSTALLATION
Free-standing Fireplace/Tabletop Fireplace
• The fireplace must only be installed on a solid floor or stable surface of
non-combustible material.
• Fully assemble the fireplace as shown in the instructions.
• Place the burner in the burning chamber of the fireplace body.
Important Notes on Installation
• This fireplace is operated with alcohol which has a low flash point and is
volatile. Have an expert installer check the environment before installing
the unit.
• Installation is carried out on the basis of this manual.
• The environment within 50-60 cm of the fireplace should be lined with
heat resistant materials.
• Make sure that the table fireplace/freestanding fireplace is on a flat table/
floor where it will not be touched when walking around. Keep children
away from the fireplace.
• Ensure that the burner is not exposed to strong wind.
Note: Ethanol is not included and must be purchased separately from a DIY
store or fuel retailer.