Power On/Off - yellow jacket 52030F Instrucciones De Operación

horizontal
• The image area should include the person's whole face
• If an increased temperature is seen using the thermal imaging system,
you should use a different method to confirm a fever. Public health
officials can help you determine if the fever is a sign of infection.
PARTS OF THE THERMAL IMAGER
1: Micro SD card slot
2: Type-C USB interface
3: Interface cover
4: LED light
5: Infrared camera
lens cover
6: Trigger
7: Infrared camera lens
8: LCD
9: Power button
10: Tripod mounting hole
11: Flashlight button
12: Left button
13: Down button
14: Right button
15: Back button
16: Replay button
17: Up button
18: SET button
THE THERMAL IMAGER DISPLAY
1: Temperature unit option
2: Cursor option
3: Color palette option
4: High/Low temperature
alarm option
5: Settings option
6: Temperature bar lower value
7: Temperature bar upper value
8: Maximum temperature point
9: Center point
10: Center point temperature
11: Maximum temperature
12: Date & time
13: Battery status

POWER ON/OFF

Press the yellow power button for 3 seconds to turn the thermal imager ON.
Press the yellow power button for 1 second to turn the thermal imager OFF.
MENU INTRODUCTION