Marshalltown Bullet 526-RCT26 Manual De Instrucciones página 6

3. Attach the Power Assembly (A) to the Rails (F)
using Hardware Set (H).
Note: A drill can be used to make this step easier.
5. Use Hardware Set (L) to attach Table (D) to the
Power Assembly (A).
7. Attach the Handle Assembly (B) to the Power
Assembly (A) using Hardware Set (I).
6 of 14
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
4. Connect the Tail (E) to the Rails (F) using Hardware
Set (J).
6. Use Hardware Set (K) to attach Table (D) to the
Tail (E).
8. Attach the Angle Guide (C) to the Table (D) using
the thumbscrew attached to the Angle Guide.
WS2638