Kohler K-10609-D Guia De Instalacion página 5

Low Voltage
Access Cover
High Voltage
Access Cover
2. Connect the Components
CAUTION: Risk of electric shock or product damage. Make sure the power cord is unplugged
before removing the access covers.
Low Voltage Connections – Controls and Components
Note: For wireless applications an Ethernet connection is not needed.
Remove the low voltage access cover.
Remove the grommets in the locations where the cables will be installed. Refer to the "Connection
Key."
Gently press each connection until it snaps together.
Slide the cable grommet into the slot with the male end up. Verify the grommet is properly seated.
3. Installation Checkout
Plug in the media module power cord to the electrical outlet.
Test each component to ensure proper functionality. Refer to the Installation Guide and
Homeowners Guide packed with each of the individual components for additional information.
Kohler Co.
Install grommets
flush with media box.
Grommet
Make sure power cord is unplugged
before opening access covers.
5
Male End
Slide grommet into slot with
male end up.
1093237-2-A