Opera On; Star Ng; Opera Ng Procedures; Discharging Procedures - Skyfood LAR-15LMB Manual De Instrucciones

26

3. Opera on

3.1 Star ng

The Blender is ac vated by turning the On/Off Switch # 03 (Pic.01) to ON posi on.

3.2 Opera ng Procedures

The High Performance Til ng Blender works at high speed (approximately 3.500 rpm) To
feed it proceed as follows:
1 – Remove the Lid # 01 (Pic.01).
2 – Put product inside the Cup # 02 (Pic.01) with the machine switched OFF.
3 – Place the Lid # 01 (Pic.01) back on top of the Cup and switch the machine ON.
Due to turbulence generated when machine is ON do not turn it ON without the
Lid # 01 (Pic.01). The processing me depends on the kind of product.
NEVER SWITCH THE MACHINE ON WITHOUT LOAD IN IT BECAUSE IT WILL CAUSE
IRREPARABLE DAMAGES.
It is not recommended to blend products without the addi on of any liquid,
otherwise it will overheat and damage the Cup seal.

3.3 Discharging Procedures

To discharge processed product from Blender proceed as follows:
1- Turn machine OFF.
2- Remove Lid # 01 (Pic. 01).
3- Press Lock Pedal # 06 (Pic. 01) down.
4-Tilt Cup # 02 (Pic. 01) holding its handle and discharge processed product as needed.

3.4 Cleaning

The new Blenders cup has stamped ribs that facilitate cleaning. Wash the Lid # 01 and the
Cup # 02 (Pic. 01) with water and neutral soap. Wipe up the other parts with a damp cloth.
Never do cleaning with machine plugged in. Always unplug machine before
cleaning. When washing inside the Cup be careful with the blade.
NOTE
IMPORTANT
IMPORTANT
IMPORTANT
7