Mainstays MS11-084-500-14 Instrucciones De Montaje página 9

13. Turn the Seat Cushion (F) upside down on a flat & soft surface to prevent scratches.
14. Flip the assembled unit upside down and attach it to the bottom of Seat Cushion (F). Make sure that
the Seat Cushion (F) is centered properly before inserting four M5 x 16 mm Screws (3) through the
metal tabs on Left & Right Leg Assembly (G & H). Securely tighten the screws with a Phillips
screwdriver. As shown in detail #6.
15. Now, stand the chair upright.
16. Repeat the process to assemble the other 3 chairs.
Hardware required
(3) M5 x 16 mm Screw
Tools required:
Assembly Instructions for Chair
Phillips screwdriver
Sketch
9
Qty.
(4)