Transporting; Electrical Connection; Conditions Of Use; Recommended Function - Master Trimmers MT Tumbler 200 Manual De Uso Y Mantenimiento

Transporting

Package (trimmer + leaf collector) 71x56x106 cm = 71 kg // Net weight MT Tumbler 200 (trimmer) = 33kg

Electrical connection

The MT Tumbler 200 machine must be connected to a 230 V/50 Hz power supply.

Conditions of use

Master Products machines must be placed on a flat surface without irregularities on the ground. The machines are only
suitable for indoor use and under no circumstances should be exposed to moisture or water. The electrical system must
always be kept dry.

Recommended function

Master Products machines can be used with all types of herbaceous and/or semi-woody plants. All other material types
must not be processed.
MT Tumbler 200 has a cutting mechanism that cannot be altered by the consumer. If the stainless steel grid is changed or
cleaned, it is essential to comply with the safety instructions provided.

Machine assembly

The MT Tumbler 200 is composed of two parts: trimmer and leaf collector.

Assembling the machine

Remove the machine from the pallet and place it on a
1
flat surface. Mount the feet (H) on the base of the leaf
collector (B) with the help of an allen key (G), washers
(I) and nuts (J).
Place the trimmer (A) on the leaf collector (B) using
2
the handles.
17