Elite power fluid Instrucciones Para El Uso página 7

Congratulations on your purchase of
an Elite hometrainer
IMPORTANT
Do not stop the rotation of the bicycle
wheel by using caliper or disk brake. This
seriously damages the roller and the tire
The resistance unit may warm-up while in
use. Let it cool down before handling it and
touching the flywheel
There are no user serviceable parts.
The warranty is void if opened or tampered
for any reason
INTRODUCTION
Check the presence of all the following
components:
N°1 resistance unit (Rif. A)
N°1 parts bag:
1 Allen wrench
2 M6 bolts (Rif. B)
2 washers (Rif. C)
FITTING THE
POWER FLUID UNIT
• 45 mm diameter roller resistance unit.
• To mount the unit to the frame, follow
the instructions in the frame's manual.
• The unit is now ready for training. In
order to set different resistance levels use
your bike's gear shifters, just like on the
road.
EN
7