Transmitting A Repeater Access Tone Rpt Tone; Activating The Frequency Inversion; Talk Around" Function - Midland CT3000 Manual De Instrucciones

Ocultar thumbs Ver también para CT3000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Transmitting a repeater access tone RPT TONE

1.
Press PTT and DOWN at the same time to transmit a repeater access
tone. The tone set by default is 1750 Hz.
2.
If you want to change the tone frequency follow these steps:
3.
Press FUNC on the front panel to enter the radio menu;
4.
Select option no. 1 FUNC MENU;
5.
Select RPTONE;
6.
Now you can choose amongst these options:
1750 Hz - 2100 Hz - 1000 Hz - 1450 Hz
7.
Push the knob to confirm your selection;
8.
Press P3 twice to exit the menu and return to standby condition.

Activating the frequency inversion

The frequency inversion can be activated only if a frequency offset (positive or
negative) is enabled.
1.
Keep pressed FUNC to enter the radio menu;
2.
Select option n. 2 CHAN MENU;
3.
Select option n. 8 REV;
4.
Now select ON with the main knob.

"Talk around" function

This function can be activated only if a frequency offset (positive or negative)
is enabled.
To activate the "talk around" keep pressed FUNC and then select option
1.
no.9 TALK.
2.
The icon A will be shown on the display.
3.
Now you can communicate with the other users without using a repeater.
When the Talk Around function is activated, the frequency offset will be
disabled and the radio will transmit on the rx frequency.
Midland CT3000 instruction guide
| 19

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido