Troubleshooting - Midland CT3000 Manual De Instrucciones

Troubleshooting

PROBLEM
The radio does not turn on
The display shows RX but the radio
does not receive
The keypad does not work
While you are communicating with
your group, you receive interferences
from other groups
Midland CT3000 instruction guide
SOLUTION
Power supply cable disconnected or
defective. Check its status.
Fuse broken. Check the status of the
fuses in the radio and in your vehicle.
Verify the volume level is not too low!
Check that you have set the same
CTCSS tones and DCS codes of your
group.
The keypad lock is activated
Change the CTCSS tone or DCS
code of your group
| 27