Connection To A Computer - Steren COM-260 Manual De Instrucciones

- The included VGA cable, of the LCD or CRT monitor to the VGA IN connector.
- Cable 3.5 mm audio in the SPEAKER input.
- Power input 5V DC to an electrical outlet adapter.
- Turn on the monitor. The image of the selected channel is displayed on the
screen.

4. CONNECTION TO A COMPUTER

- Place the main unit near the LCD or CRT monitor.
- Connect:
- The antenna or CATV cable into the CABLE IN connector located on the back
panel.
- The included VGA cable, from the PC to the VGA IN connector and the VGA
cable from the monitor into the VGA OUT connector.
- The 3.5 mm audio cable in the SPEAKER input.
- The 3.5 mm male-male cable of the audio card from the PC to the AUDIO IN
connector.
- Power input 5V DC to an electrical outlet adapter.
- Turn on the monitor and press INPUT to select TV mode. The image of the
selected channel is displayed on the screen.
7 7