Troubleshooting - Kalorik TKG AP 1000 Manual De Usuario

TROUBLE SHOOTING
If the machine can't work properly, please kindly check as below before you send it out for repair.
Problem
The device does not start /
the buttons do not work
There is always an
unpleasant smell coming
from the device.
The device is very noisy
Temperature and humidity
do not change or very little
If, after checking the above solutions, the problem persists, the appliance must be sent to
the service center for inspection and possible repair.
PERFORMANCE INDICATORS
Product name
Voltage Supply
Air flow volume (m
Noise level
Length of power cord
TKG AP 1000
Check whether the
power cable is plugged
in
Is there a strong smell in
the room where the
appliance is located?
(Notes: the air needs
constant cleaning)
Has the life of the HEPA
filter been exceeded?
Has the filter packaging
been properly removed?
Has the life of the HEPA
filter been exceeded?
The device does not
support a room that is too
large
/h)
3
Possible cause
Air purifier Model No: B-D01
DC 5V
≥ 35m /h
3
≤ 35dB (A)
≥ 1,5 m
10
Possible solution
Connect the cable
properly
First, ventilate the room
well and start the unit.
Replace the HEPA filter
with a new one
Remove the filter and
remove the packaging
and put the filter back in
place
Replace the HEPA filter
with a new one
Use the device in a
suitable room