GYMFORM LEG ACTION Manual De Instrucciones página 8

8. It is not possible to set the time or speed on
automatic programmes.
9. If you choose one of the two manual
programmes (M0 and M1), you can set a time of
1 to 10 minutes before starting the programme.
• Press the Less Time button (T-) (11) on the
remote control or the - button on the unit (20) to
reduce the time.
• Press the More Time button (T+) (10) on the
remote control or the + button on the unit (21) to
increase the time.
10. Once you have chosen the time, press
the Start/Stop button
control or the Start button
to start the programme. When the programme
begins, you can set the speed (from 1 to 15) at
any time.
• Press the More Speed button (S+) (12) to
increase the speed.
• Press the Less Speed button (S-) (13) to
reduce the speed.
11. To turn off the device, first press the Start/
Stop button (9) on the remote control or the
stop button on the device
the ON/OFF button on the device to turn it
completely off.
12. Disconnect the device from the mains after
use.
Positions for using the device:
The device can also be used on the legs and
back. Consult the exercise guide on how to use
the product.
NOTE: Never apply all your weight on the
device, as this may damage it.
CLEANING
Always unplug the device from the mains before
cleaning it.
Wipe the device and foot pads (4) with a damp
cloth and mild soap. Do not use abrasive
or corrosive cleaners. The foot pads can be
removed for easy cleaning (4).
TECHNICAL SPECIFICATIONS
Input: 24 V
Power: 30 W
Adapter Technical Specifications
Input: 100-240 V
Output 24 V
AUSTRALIA & NEW ZEALAND ONLY
This product has the benefit of certain Consumer
Guarantees. These are prescribed by the
Australian Consumer Law & the New Zealand
Consumer Guarantees Act 1993 both of which
provide protection for consumers. There is no
express warranty for this product in Australia or
New Zealand. The above paragraph refers to
other countries.
WARRANTY
This product is covered by a warranty against
8
(9) on the remote
(19) on the device
(17). Then press
1.5 A
manufacturing defects subject to the time
periods stipulated by the legislation in force in
each country.
ATTENTION
DISPOSAL OF MATERIALS
A symbol of a crossed-out wheeled bin
means you should find out about and
follow local regulations about disposing of
this kind of products.
Do not dispose of this product as you would
other household waste.
Dispose of this device in accordance with the
corresponding local regulations.
Electrical and electronic
hazardous substances that can have harmful
effects on the environment and/or human health
and should be recycled properly.
Made in China.
devices contain