Sanus Systems VMUC1 Instrucciones De Montaje página 6

Step 4 (cont)
The .5 inch Spacers (f) should only be used if there is an obstruction or the hole pattern is physically recessed on the back of the LCD
panel. See Diagram 4b for assistance.
e
mounting plate
f
Step 5: Adjusting the screen height.
Using a Phillips screw driver, slightly loosen the Bolts (d,e) that secure the LCD panel to the mounting plate. Adjust the LCD panel to
the desired height. Tighten the Bolts (d,e) to secure the LCD panel to the mounting plate. See Diagram 5 for assistance.
6901-20074_ML.indd 6
Detailed View
LCD Panel
mounting plate
Diagram 5
d,e
Diagram 4b
12/29/06 4:25:54 PM