Installation Instruction - TECshow ORBIT HEX Manual De Usuario

Installation instruction

CAUTION!
Please consider the GB7000.15/EN60598-2-17 and the oth-
er respective national norms during The installation. The
installation must only be carried out by a qualified person.
• The applicable temperature for the lighting is between
-25°C to 45°C. Do not use the lighting under or above the
temperature.
• The installation of the effect has to be built and con-
structed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
• The installation must always be secured with a second-
ary safety attachment, e.g. an appropriate safety rope.
Never stand directly below the device when mounting,
removing or servicing the fixture.
• The operator has to make sure the safety relating and
machine technical installations are approved by an ex-
pert before taking the device into operation for the first
time.
• These installations have to be approved by a skilled per-
son once a year.
• Overhead mounting requires extensive experience, in-
cluding among others calculating working load limits,
installation material being used, and periodic safety in-
spection of all installation material and the device. If you
lack these qualifications, do not attempt the installation
yourself. Improper installation can result in bodily injury.
MENU and display
ORBIT HEX
ENGLISH VERSION
1. Signal input - 2. Signal output - 3. ON/
OFF switch - 4. Fuse 2A - 5. Power IN
6. Power Out
1. LED Display
2. MODE/ESC button
3. UP button (UP)
4. DOWN button (DOWN)
5. Enter button (ENTER)
p. 5