Filter Replacement - AIR8 260i NANO Manual De Instrucciones

Filter replacement

1.
Please ensure the product is
switched-off and unplugged
before opening it or dismantling
the components for filter
replacing.
2.
Hold the unit and remove the
back-panel cover.
3.
Pull the textile tabs outwards to
carefully remove the filter
(Composite filter containing a
pre-filter, HEPA filter, carbon
filter and cold catalyst).
4.
Remove the protective foil of the
new filter.
5.
Insert the new filter with the top
part and push it in slightly to
place it correctly (tabs towards
outside).
6.
Position the back-panel in the
right position and press slightly
inwards until it clicks. Make sure
the back-panel is tightly closed.
13