Product Overview - Smanos DS-20 Manual Del Usuario

EN
Introduction
The DS-20 Door/Window Sensor detects the open/close status of a
door or window being protected.
It can be installed on a door/door frame, window/window frame or
any other object that can be opened/closed and needs detection.
Pairing to the K1 Hub
The sensor will need to be paired to the K1 Hub first before use.
To pair this sensor to the K1 Hub, please refer to the K1's user
manual or in the K1 section of the smanos home app, press the "+"
button and follow the instructions on the Accessories page.

Product Overview

Rear View
Front View
LED Indicator
Transmitter Magnet Slide to Open
LED Indicator
Blinks once: Transmitter and Magnet were separated and sends
alarm signal to the K1 Hub.
Blinks once per 3 seconds: Low battery; please change the battery
as soon as possible.
Tamper Switch
Anti-tamper protection ensures that any attempts to remove the
Battery Cover will result in an alarm, push notification and possible
email if selected.
EN
Inside View
Tamper Switch