Cooper Lighting Metalux FPX Instrucciones De Instalación página 3

Install Fixture:
1. Unscrew and remove one (1) of the frame pieces and
slide fixture into channel (retain screws for reuse).
Removing frame pieces varies slightly, depending
N ote:
on which piece you are removing. Reference the
figures 7 & 8 below for details on removal and
re-installment.
Figure 7.
Figure 8.
2. Reinstall the removed frame piece with the retained
screws to complete the installation. (Figure 9.)
Installation Instructions – FPX Surface Kit
Figure 9.
Using Suspension Kit with Surface Mount Box
Assemble Box:
1. Slide two (2) L - Brackets into the screw channel of
frame. (Figure 10.)
Figure 10.
2. Slide adjacent frame into place so that the clearance
holes line up with those in the L - bracket. (Figure 11.)
Figure 11.
COOPER LIGHTING SOLUTIONS
IB519101EN Installation instructions
3